BORE GAUGE & SLIP GAUGE
BORE GAUGE
- Longer plunger stroke with no effect on accuracy.
- Carbide is used for the contact point ensuring high durability and wear resistance.
- Alternative indicators may be used in place of those recommended.
- Optional extension rods can be attached for measuring deep holes.
MAKE | MODEL | RANGE |
Precision Germany | PG-BG35 | 18-35 mm |
Precision Germany | PG-BG60 | 35-60 mm |
Precision Germany | PG-BG150 | 50-150 mm |
Precision Germany | PG-BG160 | 100-160 mm |
Precision Germany | PG-BG250 | 160-250 mm |
Precision Germany | PG-BG400 | 250-400 mm |
Precision Germany | PG-BG800 | 400-800 mm |
NOTE: ALL BORE GAUGE WILL COME WITH EITHER 0.01 MM OR 0.001 MM DIAL
Other Size and Type Available on Request.
Gauge Blocks
- 0.3mm to 100mm – standard sets
- Metric (1mm / 2mm Base) & Imperial
- Custom sizes upto 100mm
- Covers all grades i.e. Grade’K’,
- Grade’0′, Grade ‘1’ & Grade ‘2’
- Carbide | Steel | Ceramic
- ISO 3650 / DIN 861
Standard Gauge Block Sets (Metric) as per ISO 3650 – 1mm base gauge block
Standard Set | Step ‘mm’ | Range/Size ‘mm’ | Qty (pcs.) | Total qty (pcs.) |
– | 1.0005 | 01 | 122 | |
0.001 | 1.001 – 1.009 | 09 | ||
0.01 | 1.01 – 1.49 | 49 | ||
0.1 | 1.6 – 1.9 | 04 | ||
0.5 | 0.5 – 24.5 | 49 | ||
10 | 30 – 100 | 08 | ||
– | 25, 75 | 02 | ||
M 112/1 | – | 1.0005 | 01 | 112 |
0.001 | 1.001 – 1.009 | 09 | ||
0.01 | 1.01 – 1.49 | 49 | ||
0.5 | 0.5 – 24.5 | 49 | ||
25 | 25 – 100 | 04 | ||
M 103/1 | – | 1.0005 | 01 | 88 |
0.01 | 1.01 – 1.49 | 09 | ||
0.5 | 0.5 – 9.5 | 19 | ||
10 | 10 – 100 | 10 | ||
M 47/1 | – | 1.0005 | 01 | 47 |
0.01 | 1.01 – 1.09 | 09 | ||
0.1 | 1.1 – 1.9 | 09 | ||
1 | 1 – 24 | 24 | ||
25 | 25 – 100 | 04 | ||
– | 1.005 | 01 | ||
M 32/1 | – | 1.005 | 01 | 32 |
0.01 | 1.01 – 1.09 | 09 | ||
0.1 | 1.1 – 1.9 | 09 | ||
1 | 1 – 9 | 09 | ||
10 | 10 – 30 | 03 | ||
– | 60 | 01 |
Other Size and Type Available on Request.
Unique Features
- Features of Gauge Blocks
- Highly accurate, very low deviation from flatness, surface finish & nominal length
- High resistance to wear & dimensionally stable
- Superior wringing quality
- Each gauge block is marked for size & serial number
Selection Of Material
Steel, Tungsten Carbide & Ceramic Material
Steel
Steel gauge blocks are widely used since most of the manufacturing components are made from steel which nullifies the measurement difference due to same thermal coefficient of expansion. Steel is ideal for regular use when used with proper care & regular maintenance.
Tungsten Carbide
They are highly resistant to wear and thus ideal where the gauge blocks are used heavily. The study confirms that the Tungsten Carbide gauge blocks are of 10 times greater wear resistant than that of steel and thus extremely economical.
Ceramic
Ceramic gauge blocks are extremely resistant to wear and scratches. As a result, any minor damage to the wringability of their measuring face is unlikely. Corrosion resistant, these gage blocks are resistant to sweaty hands, and normal wear and tear.
Selection Of Grades
Grades Are Selected As Per The Area Of Its Use
- Grade ‘K’ : These gauge blocks are “Reference Standards” & used as masters for calibration of gauge blocks in calibration lab.
- Grade ‘0’ : These gauge blocks are “Lab Standards” & used for calibration of gauges & measuring instruments.
- Grade ‘1’ : These gauge blocks are “Working Standards” used in inspection room for day to day verification & calibration of gauges/measuring instruments.
- Grade ‘2’ : These gauge blocks are “Working Standards” used in production shop for inspection/ setting purpose.
